scratching on the inside of barrel

protofreak · **Joined:** Sat Feb 21, 2009 6:49 pm **Posts:** 146

any else have problems with the tips/back of the ul barrel scratching real easy on the inside

Z3R0 · **Joined:** Sat Feb 14, 2009 3:06 pm **Posts:** 151

Hmm... never happened to me, but the only UL I owned was the Proto UL that came with my PM8, and I hardly ever used it because I already had a Cocker threaded kit of my own when I got my PM8. Just be sure to keep the inside of your hopper and breech clean and use some warm, soapy water to rinse out your barrel, then swab it out with a regular swab (the fluffy, cotton type). If it's scratching inside the bore of the tip then it means there's probably some dirt or debris getting in there somehow.

protofreak · **Joined:** Sat Feb 21, 2009 6:49 pm **Posts:** 146

i use warm water to rinse them out i use a soft squgge and a rubber one i never use dirty paint and keep the rotor clean

they arent fine small ones some are pretty big

Z3R0 · **Joined:** Sat Feb 14, 2009 3:06 pm **Posts:** 151

Strange... you don't shoot reballs often, do you?

protofreak · **Joined:** Sat Feb 21, 2009 6:49 pm **Posts:** 146

no not a reball place around here

Otter_72 · **Posted:** Mon Jun 22, 2009 4:48 am

Quote:

Strange... you don't shoot reballs often, do you?

This is what came to mind. I guess if your shots are not going all over the place I wouldn't worry about it.

protofreak · **Joined:** Sat Feb 21, 2009 6:49 pm **Posts:** 146

i found the reason my worn down squeegy tip

scratching on the inside of barrel

Who is online